F2-H Wall Mounting Facial Recognition Temperature Measure Device Datasheet-EN
Face Recognition Device Features
- Support external access control card reader, QR code scanner, ID card reader
- Support RS232 serial port, Wiegand 26/34 output, support relay, exit switch, door magnetic output content
- Support local storage of 500,000 historical records
- Support 20,000 face library
- Support public network and local area network deployment
- Support HTTP interface connection；
- Support display configuration；
- Support identification distance configuration
Face Recognition Device Specification
| Face Recognition Temperature Measure all-in-one Machine |
| Product model | F2-H |
|
Characteristics | Main function | Face recognition temperature measurement |
| Use environmen | Indoor , semi-outdoor |
| Color | Silver |
|
Camera | Type | RGB | Infrared |
| Resolution | 2 million pixels | 2 million pixels |
| Aperture | F2.8 | F2.8 |
| Focal length | 3.18mm | 3.18mm |
| Software
Dynamic |
automatic |
automatic |
| Vertical wide
angle |
84° |
84° |
| Horizontal wide
angle |
54° |
54° |
| Infrared
supplement light | Support |
| White
supplement light | Support |
|
Core parameters | Android | Android7.1 |
| CPU | Quad-core, 1.8GHz |
| storage capacity | RAM 2G ROM 8G |
|
Human-comput er interaction |
Monitor | 8 inches, full viewing angle, 170 ° IPS LCD screen, resolution
800 * 1280 |
| Touch screen | support |
| Face sensing
module | support |
| Face temperature measurement
module |
support,Serial / I2C interface |
| Card reader | Support, Optional |
| Communication
method | Ethernet | 10/100 Ethernet |
| WIFI | Comply with IEEE802.11b / g / n standard (2.4G) |
|
Identification Method | Face | Support |
| IC card | Support, optional |
|
Input output interface | RJ45 interface | Support 10/100 Mbps |
| Power supply
interface |
DC12V-2A |
| Power | Adapter | DC12V-2A |
|
Environmental requirements | Operating
temperature | -20℃～60℃ |
| Working
humidity |
20%~90% (non-condensing) |
| Static protection
level |
IEC61000-4-2, LEVEL3 |
| External Interface Definition |
| Type | Interface | Explanation |
| USB | USB 2.0 | Support |
| Ethernet port | RJ45 | 10/100 Ethernet |
|
Relay |
NC COM NO | Relay normal off/Common/normal on.Usually,door lock supply is positively connected to the COM port,and then according to the door lock type,relay power negatively connected NO port or NC
port. Note: Maximum load of relay contact is 2A |
|
Gate sensor | IN
GND |
Check door open/close status, input |
| Exit
button | PUSH1
GND |
Press the button,door opening control signal,input |
|
Serial | RX
TX |
RS232 |
|
Output power | 5V
GND |
Support device external output 5V |
|
Wiegand | WG_D1 WG_D0
GND |
Wiegand output interface, support 26bit / 34bit protocol |
|
Input power | GND
12V+ | Power input:12V DC |
|
Temperature measurement module | Operating temperature |
0℃ ~ +55℃ |
| Storage temperature |
-20℃ ~ +65℃ |
| Power consumption |
< 0.3w |
|
Basic Parameters |
Pixel |
32*32 Real-time temperature output |
| Measurement accuracy |
I + 0.5℃ |
| Measuring distance |
0.3 ~ 1.0m |
|
WIFI |
2.4G 802.11b/g/n |
|
Bluetooth |
BluetooH4.0 |
